Octofiber Carbon 500g

General

Octofiber Carbon filament is based on premium PETG and High-Modulus Carbon Fiber. This filament is ideal for anyone that desires a structrual component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. 

Compatibility

This Carbon filled material can be used practically on any desktop 3D Printer. A heated bed is not strictly necessary, but if you have one, it will be even more easy to print with. Please note that carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle. Therefore we recommend stainless steel nozzles.

Features

Why would you use this material?
Superior Chemical Resistance vs. ABS
Amorphous: Low and near isotropic shrinkage (which is basically equal to: low-warp :)
Low moisture absorption: 3X lower vs. ABS
Very low odor emitted during printing
Wide processing range: 230 - 270°C
You can check all material specifications in the technical datasheet.

Print settings

We recommended the following print conditions:
Extruder: Ideally 230 to 260°C
Platform Temp: 50 to 80°C
Platform Prep: Clean glass with Kapton Tape, PVA-based glue, Hairspray
Nozzle: We currently recommend minimum 0.40mm orifice.
Carbon fiber filament is more abrasive than unfilled materials, so extended use will result in more wear on your nozzle, so a stainless steel nozzle is advised.