Mass Portal XD10

Product no.: mass-xd10

This product is available to order.

2,999.00
Available delivery methods: Pick up from the warehouse, Courier service (ONLY Helsinki capital region), Delivery to workplace (Express-paketti), Postipaketti (pakettiatm/ posti)

Printer

Technology: Fused Filament Fabrication (FFF)
Build volume (w x d x h): 100 mm x 100 mm x 200 mm, square
Build chamber: open or enclosed
Build chamber illumination: yes
Build chamber ventilation: two intake fans
Air ltering: HEPA & active carbon lters
Motion system: precision miniature linear guideways Frame: rigid aluminium frame
Maximum printhead travel speed: 250 mm/s Electronics: 32-bit
Firmware: open-source Repetier-Firmware
Extruder type: Bowden tube
Feeder: custom-designed dual geared grip feeder XYZ accuracy: 1.5, 1.5, 5 micron
Ultimate layer resolution: 70 micron (0.2-mm nozzle)* Noise level: 56 dBA
Remote monitoring: built-in HD camera
Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi

Printhead

Printhead: all-metal Mass Portal Pharaoh Printhead cooling: fan
Heater: two resistive heaters
Nozzle temperature: 75 - 300 °C

Nozzle heatup time: < 2 min
Nozzle inner diameter: 0.2 mm (supplied), 0.4 - 1.0 mm Deposition speed: < 1 mm3/s (0.2-mm nozzle)*
Printed part cooling: 3 fans

Build plate

Build plate: quick-release glass plate Build plate temperature range: RT - 120 °C Build plate heatup time: 5 min

Power requirements

max. 465 W, 220 VAC, 2.2 A, 50-60 Hz

Model material

Type: Filament
Filament diameter: 1.75 mm
Supported nozzle materials: “open material” with softening/melting temperature below 300 °C
(ABS, ASA, CPE, HIPS, PA (Nylon), PC, PET, PETG, PLA, PMMA, POM, PP, PVA, TPE, TPU, as well as lled laments)
Hardness: > 85 A Shore

Printer size and weight

Dimensions (w x d x h):
340 mm x 370 mm x 641 mm

340 mm x 390 mm x 641 mm (with spool holder) Weight: 22.5 kg

Shipping dimensions (w x d x h):
400 mm x 400 mm x 760 mm

Shipping weight: 30 kg

Ambient conditions

Operating ambient temperature: 15-35 °C, 10-90 % RH

Software

Supplied software:
Simplify3DTM (slicer and control software) cloud-based FabCloudTM (printing, drying pro le management software)
FabControl® (printer control software)

Supported OS: Linux, MacOS, Windows Supported 3D models le format : .stl, .obj, .3mf Supported print le format: .gcode 

Browse this category: Mass Portal