Fuse Blast delivers 100% hands-off cleaning and polishing for SLS parts
Achieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts in as little as 15 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.
Finished Parts In 15 Minutes
Cleaning routines automatically post-process an entire build chamber in as little as 15 minutes, while the passive filtering reduces media saturation and extends media life to save on overhead costs.
Consistent Results
Pre-programmed routines take out the guesswork for consistent results, while manual mode allows you to adapt to any part requirements.
Professional Parts
Deliver clean-to-the-touch parts thanks to the in-line ionizer that prevents dust and media from re-settling on your parts, or go the extra mile with the optional polishing function for a smooth, semi-gloss, and dye-ready surface finish.
Streamlined Post-Processing
Fuse Blast seamlessly integrates into the Fuse ecosystem for an automated post-processing workflow that reduces labor time by 80% and delivers finished parts in as little as 15 minutes.
Features
Fuse Blast is a fast, automated solution that delivers professional results, consistently.
Hands-off post-processing
Passive recycling for extended media life and faster processing on Sift
Pre-programmed routines
Add-on polishing upgrade*
In-line ionizer for clean-to-the-touch parts
Dual-function blasting with automatic or manual cleaning
Fully sealed and workshop-friendly operation
Specifications
Printer Compatibility: Fuse Series SLS 3D Printers, Third-party powder bed fusion 3D printers
Minimum Dimensions for Convenient Access (W × D × H): 145 × 150 × 175 cm
Dimensions (W x D x H): 100 × 75 × 175 cm
Height when open: 195cm
Weight: 164 kg (without blasting media)
Media Hopper Capacity: 8.3 L, equivalent to 13 kg of 200-300 µm glass media
Waste Hopper Capacity: 10.6 L
Operating Environment: 10–36 ºC, Elevation up to 2286 meters
Air Handling: Negatively pressurized hood with replaceable HEPA filter, Independent venting system
Power Requirements: 230 VAC, 3 A (no dedicated circuit or vacuum required)
Compressed Air Requirements: Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar. Regulate pressure input between 90-120 PSI / 6-8 bar. Typically achieved by a single 4 HP compressor.
Ethernet Connectivity: RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port. Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
USB Connectivity: USB (rev 2.0) C port with a USB A-C or C-C cable
Sound Emission: Does not exceed 70 dB(A).
Product Control: Interactive touchscreen, foot pedals for manual control.
Included Accessories: Transfer container, Control pedals, ESD wrist strap, 7mm socket wrench, Blast orifice (3mm), Blast orifice (4mm), T-20 driver, Floor mat
Tumbling Basket: 450mm internal diameter (Fits a full Fuse build volume)
Internal work area (W x D x H): 71 x 55 x 67 cm
Accessible work area (W x D x H): 57 x 50 x 67 cm (basket removed)