Form Wash

Automate Form 2 & 3 3D-print cleaning with Form Wash. Automatically lifts parts out of the IPA after wash, avoiding over-soaked & warped prints.

Approximate wash time of 10 minutes.

8.6 litres IPA bucket volume, which lasts about 70 prints.

NOTE! Updating the impeller might be needed if used with TPM solvent. Contact us for more info.

Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

What’s Included

• Ergonomic Pen Sander: Creates a uniform surface finish on flat and gently curved parts
• Rotary Tool: Removes support marks and enlarges holes
• Rotary Tool Bit Kit:
• Grinding + Polishing Bits (16 pieces): Grind down, sand, and polish parts
• Buffing Bits (12 pieces): Create a uniform finish after grinding or sanding
• Flush Cutters: Removes support tips
• Hobby Knife and Blades: Precisely removes individual support tips
• Spray Bottle: Dispenses IPA or water to remove dust, or mineral oil to polish surfaces
• Microfiber Cloth: Cleans dust from sanded or polished parts
• Large Silicone Mat (16 x 24 in / 40 x 60 cm): Protects work surfaces throughout the finishing process

Resin Pumping System is an accessory for Form 3 Series stereolithography (SLA) 3D printers that seamlessly delivers 5 L of resin through a pumping system directly to the printer’s resin tank. Reduce waste by 86%, improve efficiency with less frequent cartridge changes, and unlock bulk pricing on Formlabs SLA resins.

What’s Included

• Resin Pump
• Transfer Tube

Compatibility

• Printer compatibility: Form 3, Form 3+, Form 3B, Form 3B+, Form 3L, Form 3BL

Replacement tank for Form 2 SLA printer.

It comes with a reusable lid and wiper, making it easy to stack tanks and store resin outside of the Form 2.

The Standard Resin Tank is not compatible with Aggressive resins. See this article for further information.

New improved Form 2 Resin Tank

Resin Tank LT is suited for long term use and rigorous, high volume printing, with much longer lifetime, more accurate printer detection, anti-spill geometry, and easier wiper release for streamlined workflows.

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3 Resin Tank allows for a dynamic and precise print process.

Note! Three versions on Form 3 resin tank have been manufactured, V1, V2 and V2.1. From Q3/2021 onwards, only V2.1 tanks are on sale. These are compatible with all Formlabs materials.

V2.1 tanks have limited life when printing certain materials. Further information here.

Replacement Resin Tank for Formlabs 3L and 3BL.

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3L Resin Tank allows for a dynamic and precise print process, scaled up for large format printing.

Note! Newest V3 version of Tank, is not yet compatible with Elastic 50A resin. Contact us at asiakaspalvelu@maker3d.fi , if you want to buy older version of the tank that is compatible with Elastic 50A resin. We expect to complete validation of Elastic 50A Resin and Form 3L Resin Tank V3 by the end of Q4 2023

Build Platform 2 with patented Quick Release Technology allows you to quickly and easily release parts from the build platform without tools in seconds. Build Platform 2 eliminates risk of damaging your part and streamlines your workflow.

Compatibility

Printer compatibility: Form 3+, Form 3B+, Form 3, Form 3B, Form 2
Build Platform 2 is certified biocompatible.

Features

Instant, Damage-Free Part Removal
Build Platform 2 has a flexible print surface that instantly releases parts, eliminating the risk of damaging parts using traditional removal tools.

Compatible With All Formlabs Materials 
Build Platform 2 is compatible with all Formlabs materials, including biocompatible resins*.
Stainless Steel Print Surface
Build Platform 2 is built with a gouge-free, stainless steel print surface ensuring robust, long-term durability.

*Temporary CB Resin and Permanent Crown Resin are pending validation with Build Platform 2. At this time, Stainless Steel Build Platform is still required for these materials.

Build Platform for Formlabs Form 2 & 3+/3B+ printers. Solid structure with aluminium surface.

The Stainless Steel Build Platform is a corrosion-resistant build platform made with surgical grade stainless steel. With a seamless look, this build platform offers a more professional design and high print reliability.

The Stainless Steel Build Platform is required for Permanent Crown and Temporary CB Resins, and compatible with all resins.