BASF Ultramid grades are molding compounds on the basis of PA6, PA66 and various co-polyamides such as PA6/66. Ultramid is noted for its high mechanical strenght, stiffness and thermal stability.

In addition Ultamid offers good toughness at low temperatures. Owing to its excellent properties, this material has become indispensable in almost all sectors of engineering for wide range of different components and machine elements, as a high-grade electrical insulation material and for many special applications.

Ultrafuse PA is the translation of BASF's Ultramid to 3D printing space.

With Ultrafuse PA, it is possible to print semi-flexible thin parts, however it is very stiff in higher thicknesses. It has a lower melting temperature than PA6 and PA66 hence it can be printed in a lower temperature as well as it has better impact strenght against PA6 and PA66 which opens up a new application field to the end-users.

PAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability and chemical resistance, it has very good processability. It works in any FFF printer with hardened nozzle.

In addition to that, it is compatible with BVOH, water soluble support
material and HIPS which allow to print complex geometries that works in
challenging environments.

Advantages of PAHT CF15

• Higher chemical resistance than most PA grades
• High temperature resistance up to 150°C
• Strong and stiff parts
• High dimensional stability
• Easy to process
• Low moisture absorption

More about the material here

Note! Material requires abrasion resistant nozzle like CC core, ruby tipped or steel nozzle.

BASF Ultrafuse PP GF30 is a polypropylene reinforced with 30% glass fiber content. The fibers in this compound are especially designed for 3D-printing filaments and are compatible with a wide range of standard FDM/FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding industrial applications. Key properties of PP GF30 are:

• Extremely high stiffness
• High heat resistace
• UV-resistant
• Chemical resistant

PP GF30 is a functional 3D-printing filament which can be used in high performance-applications. The excellent mechanical properties, high temperature- and chemical resistance makes this filament highly suitable in an industrial environment.

Note! Material requires abrasion resistant nozzle like CC core, ruby tipped or steel nozzle.

BASF Ultrafuse BVOH support material 350g

Innofil BVOH is new water soluable 3D printing support material. It is designed to be a better and easier solution to PVA. Suitable for all materials we have tested on Ultimaker

BVOH compared to PVA

• Prints easily and reliably, without the typical oozing problem of PVA. This makes the material much more reliable, especially on long and complex prints
• Dissolves in water faster than PVA and is easier to remove from the print
• Does not collect ambient moisture as much as typical PVA, which makes it more reliable in this regard as well

lnnoflex: flexible, rubberlike elastomer material with different levels of stiffness. A material with a reduced carbon footprint and improved elastic performance.

Shore hardness 45D (slightly harder than 40D), made from Arnitel®Eco.
Arnitel®Eco is a partly bio-based Thermoplastic Copolyester Elastomer (TPC) plastic, which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters.

This material is proven to have a carbon footprint up to 50% lower than
comparable co-polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers don't detach - even with extreme deformation. Especially suitable for printing flexible parts like miniature tires, drive belts, bracelets and parts that have to be extremely flexible and have to be bent often

Ultrafuse TPE 60D: flexible, rubberlike elastomer material with different levels of stiffness. A material with a reduced carbon footprint and improved elastic performance.

Shore hardness 60D, made from Arnitel®Eco.
Arnitel®Eco is a partly bio-based Thermoplastic Copolyester Elastomer (TPE) plastic, which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters.

This material is proven to have a carbon footprint up to 50% lower than
comparable co-polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers don't detach - even with extreme deformation. Especially suitable for printing flexible parts like miniature tires, drive belts, bracelets and parts that have to be extremely flexible and have to be bent often