Form Cure

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

Form Cure’s turntable rotates to provide uniform exposure.

The heating system preheats the chamber to get parts ready for optimum post-curing.

Formlabs Fast Cure for fast curing of dental parts

Fast Cure is our powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Formlabs Dental resins have been rigorously validated and fine-tuned with Fast Cure to work safely and seamlessly in an end-to-end workflow. The touch screen makes it easy to start a cure cycle with preloaded validated settings for each Formlabs Dental resin.

Features

Powerful and fast curing solution for dental 3D printing, validated in an end-to-end workflow to allow safe and efficient patient treatments.

Speed

Cure any dental 3D printed part in one to six minutes with Fast Cure, our high-performance curing unit. Cure dental models in one minute, crown and bridges in five minutes, occlusal guards in six minutes.

Instant Heating

No preheating required thanks to 200 W powerful 405 nm LED lights.

Validated End to End Workflow

Leverage Fast Cure’s preset and tuned settings for Formlabs’ Dental Resins which have been rigorously validated and fine-tuned to work safely and seamlessly in an end-to-end workflow.

Future Proof

Create and save custom settings for resins of your choice on the 7.9” touch UI. Connect a nitrogen tank when desired through the unit inlet*.
 *Curing of Formlabs resins do not require nitrogen

Resin compatibility

White V4, Grey V4, Draft V2, Model V2, Model V3, Dental LT Clear V2, Biomed Amber, Biomed Black, Biomed Clear, Biomed White, Custom Tray V1, Denture Base, Denture Teeth, IBT V1, Permanent Crown, Surgical Guide V1, Temporary CB

Tech specs

• Printer Compatibility: Form 2, Form 3B/+, Form 3/+, Form 3L/BL (limited height to 6.5cm)
• Dimensions: 27.5 x 31.0 x 31.0 cm 
• Weight: 8.2 kg 
• Turntable Diameter: 18 cm (fits up to 8 horizontal dental arches)
• Maximum Part Height: 6.5 cm (~vertical dental arch) 
• Operating Temperature: 5 - 35 °C
• Light Source: 56 multi-directional LEDs
• LED Power: 200 W
• LED Wavelength: 405 nm
• Power Requirements: 100 - 200 V 5.4 A, 50/60HZ

Formlabs Form Cure L

Post-curing SLA 3D printed parts helps them reach their maximum mechanical properties and achieve peak dimensional accuracy.

Form Cure L uses two 500W heaters and high-powered UV lights alongside a reflective inner cavity and rotating turntable to provide a consistent, high-intensity cure.

Whether it’s for large prints or high throughput production of smaller parts, Form Cure L can be used with all of your Formlabs SLA 3D printers.

What’s Included

• Form Cure L

Compatibility

Compatible with: Form 3L, Form 3BL, Form 3, Form 3B, and Form 2.

Availability & Shipping

New orders of Form Wash L are expected to be delivered in Q1 2022.

Form Wash

Automate Form 2 & 3 3D-print cleaning with Form Wash. Automatically lifts parts out of the IPA after wash, avoiding over-soaked & warped prints.

Approximate wash time of 10 minutes.

8.6 litres IPA bucket volume, which lasts about 70 prints.

NOTE! Updating the impeller might be needed if used with TPM solvent. Contact us for more info.

Form Wash L

All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.

Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.

Use Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.

What’s Included

• Form Wash L

• Build Platform Adaptor

• Solvent Pump

Compatibility

Compatible with: Form 3L, Form 3BL, Form 3, Form 3B, and Form 2.

The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 3D printer. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.

Compact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup.

Low waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.

Automatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.

Nonstop printing: Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 and Fuse Sift for a nonstop, cyclical workflow.

A complete toolkit: The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.

Reduce downtime by transferring modular powder cartridges and build chambers between the Fuse 1 and Fuse Sift for a nonstop, cyclical workflow.

Use the Powder Cartridge to load material dispensed from the Fuse Sift into the Fuse 1 hopper. The powder cartridge is also used as a mixing vessel when combining fresh and sieved powder.

Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 or 1+ and Fuse Sift for a nonstop, cyclical workflow.

Each Fuse 1+ includes one build chamber, compatible with the Fuse 1, 1+ and Fuse Sift. Keeping an extra build chamber in your toolkit allows you to run a new print as soon as a previous job is completed. After initial cooling inside the printer, remove the Build Chamber from the Fuse and load it into the Fuse Sift for final cooling, part extraction, and powder reclamation.

The Fuse Sift powder recovery station incorporates an external vacuum, sold separately, to help you efficiently, safely maintain a clean workspace. The integrated hose and controls allow you to easily tidy up your workspace, clean off a build chamber, or remove debris from the sifter mesh.

Due to potential hazards associated with powders, a static dissipative vacuum that is NFPA 652 compliant is required. This Class II Division 2 vacuum fulfills all safety requirements for the Fuse Sift

New improved Form 2 Resin Tank

Resin Tank LT is suited for long term use and rigorous, high volume printing, with much longer lifetime, more accurate printer detection, anti-spill geometry, and easier wiper release for streamlined workflows.